High Alumina Bricks
Fused AZS Zirconia Corundum Bricks
Lightweight Mullite Bricks
Low Creep High Alumina Bricks
Fire Clay Bricks
Acid-Resistant High Alumina Bricks
Low Creep Fire Clay Bricks
High Alumina Insulation Bricks
Phosphate High Alumina Bricks
High Alumina Refractory Bubble Bricks
Corundum Mullite Bricks
Chrome Corundum Bricks
High Alumina Refractory Castables
Corundum Mullite Castables
Zirconia-Corundum Casting Castables
Steel Fiber Castables
High Alumina Insulating Castables
Silicon Carbide Castables
Magnesia Alumina Spinel Castables
Refractory Ramming Mass
High Alumina Refractory Mortar
High Alumina Refractory Cement
Acid Resistant Castables
Alkali Proof Castables
Silicon Carbide Refractories
Refractory Precast Blocks
Chrome Corundum Casting Castables
Chrome Corundum Refractory Bricks
Refractory Ceramic Balls
Refractory Honeycomb Ceramic Regenerator
Refractory Corundum Ceramic Balls
Home > Knowledge
The insulation layer of an alumina rotary kiln is a layer of refractory fiber felt on the kiln shell, and then diatomaceous earth, floating bead bricks, or lightweight clay bricks. Some now use lightweight refractory castables. The working lining of the prezone is constructed with clay bricks, and the high-temperature calcined zone is constructed with high alumina bricks or phosphate-bonded unfired high alumina bricks.
At present, unshaped refractory materials have been widely used in the aluminum industry, such as low-calcium aluminate refractory castables for the calcining zone, steel fiber-reinforced wear-resistant castables for the kiln mouth, kiln hood, kiln tail, and other parts.
The flash furnace installs heat-resistant steel anchors or ceramic anchors on the furnace shell, then lays a layer of 20mm thick refractory fiber felt, and finally pours 200-300mm thick refractory castables.
The working lining of the reverberatory furnace of the aluminum smelting furnace in contact with the aluminum liquid is generally built with high-aluminum bricks with an aluminum content of 80 to 85%; when smelting high-purity metallic aluminum, mullite bricks or corundum bricks are used. The combination of silicon nitride and silicon nitride bricks is used for the erosion and wear parts of the hearth slope such as scrap aluminum. The aluminum tank and aluminum outlet are severely corroded by molten aluminum. Generally, self-bonding or silicon nitride-bonded silicon carbide bricks are used, and zircon bricks can also be used as linings. Generally, clay bricks, clay refractory castables, or refractory plastics are used as linings, which do not come into contact with liquid aluminum.
The lining material of the induction furnace for smelting aluminum and aluminum alloys is generally high-aluminum dry ramming material, or silicon carbide is added to the alumina dry ramming material, which is less likely to cause leakage.
Xinhongji Refractory is a Henan refractory brick manufacturer specializing in the production of lightweight insulation bricks and various types of refractory bricks. With more than 30 years of rich experience, the manufacturer uses high-quality raw materials, large-scale standardized production, and direct factory sales to ensure product quality. We can also provide customers with product customization services, as long as you provide us with product drawings and specification information.
Xinhongji Refractory mainly serves industries such as building materials, metallurgy, non-ferrous metals, electric power, petrochemicals, ceramics, mechanical casting, petroleum, etc. It can meet the use requirements of various high-temperature kilns. Its products are sold well in 29 provinces and municipalities across the country. Exported to the United States, Japan, Russia, Germany, Indonesia, Vietnam, Malaysia, and other countries and regions.
Home Tel Email Inquiry