High Alumina Bricks
Fused AZS Zirconia Corundum Bricks
Lightweight Mullite Bricks
Low Creep High Alumina Bricks
Fire Clay Bricks
Acid-Resistant High Alumina Bricks
Low Creep Fire Clay Bricks
High Alumina Insulation Bricks
Phosphate High Alumina Bricks
High Alumina Refractory Bubble Bricks
Corundum Mullite Bricks
Chrome Corundum Bricks
High Alumina Refractory Castables
Corundum Mullite Castables
Zirconia-Corundum Casting Castables
Steel Fiber Castables
High Alumina Insulating Castables
Silicon Carbide Castables
Magnesia Alumina Spinel Castables
Refractory Ramming Mass
High Alumina Refractory Mortar
High Alumina Refractory Cement
Acid Resistant Castables
Alkali Proof Castables
Silicon Carbide Refractories
Refractory Precast Blocks
Chrome Corundum Casting Castables
Chrome Corundum Refractory Bricks
Refractory Ceramic Balls
Refractory Honeycomb Ceramic Regenerator
Refractory Corundum Ceramic Balls
Home > News
Refractory bricks for glass kilns need to meet a series of specific requirements to ensure they can withstand high temperatures, resist corrosion, maintain stable performance, and provide reliable fire protection during the glass production process. The following are some of the main requirements that refractory bricks for glass kilns should meet:
High-temperature resistance: Glass kilns often operate at very high temperatures, so the refractory bricks must be able to withstand high temperatures. This usually means they need to have a high melting point and high-temperature resistance.
Corrosion resistance: Acidic and alkaline substances are involved in glass production, so refractory bricks need to be corrosion-resistant and able to resist the corrosion of the glass components on the bricks.
Thermal expansion matching: Temperatures can change significantly within a glass kiln, so refractory bricks need to have a thermal expansion coefficient that matches other materials to prevent cracks and damage.
Compactness: Refractory bricks should have high compactness to reduce penetration and prevent molten material from penetrating the interior of the bricks, thereby extending the service life of the bricks.
Mechanical Strength: Refractory bricks require sufficient mechanical strength to withstand the pressure and mechanical stresses that may be present within the kiln.
Good thermal conductivity: Good thermal conductivity helps distribute heat evenly and improves the thermal efficiency of the glass kiln.
Low water absorption: Low water absorption helps reduce the risk of bricks bursting during heating and cooling.
Stability: Refractory bricks should comply with relevant health standards to ensure stability during glass kiln operation.
Ease of processing: Refractory bricks should be easy to cut and process to fit kilns of different shapes and sizes.
Wear resistance: Considering that there may be wear in the kiln, especially in the movement area of the material, the refractory bricks should have a certain degree of wear resistance.
In short, refractory bricks for glass kilns need to have a series of characteristics such as high temperature, corrosion resistance, good thermal conductivity, and low water absorption to ensure the stable performance and long-term reliable operation of the kiln. Choosing the right refractory bricks is crucial to the efficiency and quality of the glass production process. Therefore, when selecting and using refractory bricks, it is recommended to consult an engineer or refractory supplier to ensure compliance with specific production requirements and environmental conditions.
Home Tel Email Inquiry