High Alumina Bricks
Fused AZS Zirconia Corundum Bricks
Lightweight Mullite Bricks
Low Creep High Alumina Bricks
Fire Clay Bricks
Acid-Resistant High Alumina Bricks
Low Creep Fire Clay Bricks
High Alumina Insulation Bricks
Phosphate High Alumina Bricks
High Alumina Refractory Bubble Bricks
Corundum Mullite Bricks
Chrome Corundum Bricks
High Alumina Refractory Castables
Corundum Mullite Castables
Zirconia-Corundum Casting Castables
Steel Fiber Castables
High Alumina Insulating Castables
Silicon Carbide Castables
Magnesia Alumina Spinel Castables
Refractory Ramming Mass
High Alumina Refractory Mortar
High Alumina Refractory Cement
Acid Resistant Castables
Alkali Proof Castables
Silicon Carbide Refractories
Refractory Precast Blocks
Chrome Corundum Casting Castables
Chrome Corundum Refractory Bricks
Refractory Ceramic Balls
Refractory Honeycomb Ceramic Regenerator
Refractory Corundum Ceramic Balls
Home > News
Aluminum chromium amorphous refractory materials for plasma incinerators
This technology uses thermal spraying technology to spray it directly to the surface of aluminum chromium bricks to protect the aluminum chromium bricks of the furnace wall from further eroded, which greatly extends the service life of the refractory material of the working layer, improves the plasma incineration furnace, work rate. It has the characteristics of high bonding strength with the original brick lining refractory materials, wear resistance, earthquake resistance, peeling resistance, strength, and durability, construction is not affected by seasonal climate and temperature, and is fast and convenient.
The main innovation points are
1. The main raw materials are based on jade and chromium-oxide microfilming.
2. Adopt a new composite binding agent, so that the material has a good attachment performance, the rebound rate is low, and the loss of the material in the construction.
3. At the same time, it is ensured that the aluminum-chromium amorphous refractory material has a higher melting point during use and that the aluminum-chromium amorphous refractory material does not peel or peel during the heating process.
The technical achievements of this project overall increased the use of refractory materials for the kiln working layer, ensured the operation rate of plasma incineration furnaces, realized the upgrade of plasma gasification furnace spray materials, and the thermal repair materials of the fugitive refractory materials It is very important supplement.
Home Tel Email Inquiry